EDIT HOSTS FILES IN WINDOWS EASILY

This guide shows you how to edit hosts file in Windows 10 PC easily without any third-partysoftware. The hosts file is an important system file which maps the host/site names with it’s IPaddresses. Basically, it translates the host nameto IP and IP to host name. So the browsing andaccessing other network places/shares by ‘name’ will be smoother by avoiding DNS server requests.

Steps:-
1 .Type Notepad in search box, right-click on the Notepad app and select Run as administrator.

2. When notepad is open click on File and select Open.

3. Open Host file in Notepad by going below path.

c:\windows\system32\drivers\etc\hosts

Make sure you select All Files instead of Text Documents(*.txt)

Select hosts file and click on open.

3. This is your Host File.

4. Once notepad is open you can edit the file. In this example, we will block Facebook. To do this just enter in the following after the # mark.

0.0.0.0    www.facebook.com

5. Now that you have edited your Hosts file make sure to save it.

Now notice if you try to access Facebook in the browser you can’t get to the page.

Posted by Princ€

Read more

EXTRACT AND COPY ANY TEXT FROM A IMAGE

Extract Text from any images online without downloading in your Computer. If you want to copy text from images like a boss, you came to the right place.

Here I show you how can you extract and copy text from any images online in just seconds.

Here we do this trick from downloading a chrome extension in your PC. Project Naptha is an amazing chrome extension that can extract and modify text from any images.

Project Naptha automatically applies state-of-the-art computer vision algorithms on every image you see while browsing the web. The result is a seamless and intuitive experience, where you can highlight as well as copy and paste and even edit and translate the text formerly trapped within an image.

Words on the web exist in two forms: there’s the text of articles, emails, tweets, chats and blogs— which can be copied, searched, translated, edited and selected— and then there’s the text which is shackled to images, found in comics, document scans, photographs, posters, charts, diagrams, screenshots and memes. Interaction with this second type of text has always been a second-class experience, the only way to search or copy a sentence from an image would be to do as the ancient monks did, manually transcribing regions of interest.

You can watch as moving your cursor over a block of words changes it into the little I-beam. You can drag over a few lines and watch as a semitransparent blue box highlights the text, helping you keep track of where you are and what you’re reading. Hit Ctrl+C to copy the text, where you can paste it into a search bar, a word document, an email or a chat window. Right-click and you can erase the words from an image, edit the words, or even translate it into a different language.

Steps:-

1. Download Project Naptha extension from Chrome Web Store in your Google Chrome Browser.

Extension link:- Project naptha 

2. Open any Image in your Browser and select like this.

3. Right Click on it and Select Copy Text for extracting text from any images.

You can copy text from any Internet Meme from using this Extension in your PC.

Posted by Princ€

Read more

RESET YOUR WINDOWS PASSWORD WITHOUT KNOWING THE OLD PASSWORD

In this method, we use GUI method for changing Window password. Youcan alsoreset Window password from the command prompt without knowing old password. You just need to follow 5 simple step for this tricks.

Steps:-
Step 1. Right-Click on your Computer Icon and selectManage.

Step 2. In Computer Management Settings, first select Local Users and Groups and then select Users section.

Step 3. Now select your Computer Username. Like here I select Prophet Hacker. Right-Click on it and select Set Password.

Step 4. Click on Proceed button.

Step 5.  Type New password in the boxand hit the OK button.

Step 6. Now you successfully reset your window 10 password without knowing old password.

What is the benefit of this trick?

You can change any running computer  password without knowing old password. You can prank you family and friends with this trick. If you just forget your computer password and your computer are running, you can reset your Computer Password with this trick.

Posted by Princ€

Read more

ENABLE GOD MODE IN WINDOWS 7, 8, 8.1, 10

Today we will be talking about God Mode. In simple words, it gives system administrators access to numbers of settings that are actually hidden or not available in the form of shortcuts. God mode will be helpful for users who want to access more complex system configurations.

Let me clarify one thing, it is not something detective type of things that is kept hidden. It is simply a control panel which brings us numerous settings all together which makes it easier to manage various settings. God mode was first revealed in 2007 and it works on all windows versions which include Windows 7, Windows 8 and also the new one Windows 10.

Steps:-

Step 1.You need to right-click on the desktop andthen create a new folder.

Step 2.Now you need to Right-click on the newly created folder and there you have to select the option “Rename” and paste the following code:

GodMode.{ED7BA470-8E54-465E-825C-99712043E01C}

Step 3.Once you have replaced the name, you willsee an icon which shares similar look like a control panel.

Step 4.Double-click on it to launch the God mode.

That’s it! You can now access over 260 commands!

Posted by Princ€

Read more

UNLOCK OR BYPASS ANY IPHONE PASSCODE

This is best way to bypass iPhone screen security as many of you are using iPhone and sometimes if you forgot your iPhone passcode thenthere will be no need to spend money to unlock it, just refer our post and you will easily unlock your device. The methods that we had discussed in this article will help you to access your iPhone without entering the passcode. So have a look at the complete guide below to proceed.

#1 Method- Using Itunes

This method works with iTunes. So open your iTunes on your computer or PC, and follow the below simple steps :-

Step 1.Connect the device to your PC, which you normally use to connect your iPhone to iTunes.

Step 2.Now it will automaticallysync your iPhoneand will create a backup of all your data. Afterwards, restore your iPhone.

Step 3.After that, it will show you different backups of your device, choose the most recent backup.

Step 4.After completion of your restore process, you will able to use your phone without the iPhonepasscode. Enjoy!

#2Method- Using icloud

This is only works if you have enabledFind My Phone featureon your iOS device. Because by using this method you can easily restore your iPhone and unlock your passcode. Actually, this is an amazing feature of iOS devices. It’s also very helpful when you lost your phone. You can reset all your valuable data remotely and much more.

Step 1.Go to this  icloud on your PC. Nowsign inwith yourApple ID and password.

Step 2. Click All Devicesat the top of your browser window.

Step 3.From there select any device: iPhone, iPad or iPod Touch, whose data you want to erase.

Step 4.ClickEraseto erase your desired iPhone device and its passcode.

Now using the setup assistant on your device to restore the most recent backup and it will take your complete data backup excluding passcode.

#3Method- Using Recoverymode

You can use this method to unlock your iPhone passcode, this method is handy in many ways if your iPhone is disabled, you can easily enable it using recovery mode.

Step 1.HoldSleep/Wakebutton and then tap onPower Off option.

Step 2.Now Press and HoldHome buttonand at the same time plug in your device to your computer then your iPhone device will be automatically turned on.

Step 3.Don’t leave the home button until you see the option that,Connect to iTunes. Then iTunes will prompt message that it has detected a device, you need to tap on OK.

Then, restore your device with the same steps as described above.

Posted by Princ€

Read more

ENABLE DARK THEME IN WINDOWS 10

By default Window, 10 uses a lot of white for the backgrounds of system apps. This white background thing is looking quite normal, but some users may want an even darker version of the OS.

In this post, we show you how can you get Dark Theme in Window 10 PC without downloading any software from registry hacks.

Steps:-

#1 Method

1.Open Run Program by pressing Win+R keyboard button and type regedit. Now press enter.

Select ‘Yes’ when it asks for permission.

2.Change key #1

Navigate to HKEY_LOCAL_MACHINE\ SOFTWARE \ Microsoft \ Windows\ CurrentVersion \ Themes\

Personalize by double clicking each“folder” aka key

3. Missing Personalize?

You may not have the sub-key\Personalize (I did not) so you can create one; if you already have one just go to Step 5.

4. Create \Personalize Key

If you are missing the \Personalize key, just right-click on \Themes and select New > Key and call it Personalize.

Create new key personalize

5. Create new DWORD

Right-click \Personalize and select New > DWORD (32-bit) Value

6.Name it

Name the DWORD
AppsUseLightTheme

7. Correct value?

For its value, it should already be 0 so leave it

Change Key #2

Repeat the above but for HKEY_CURRENT_USER \ SOFTWARE\ Microsoft \ Windows \ CurrentVersion \ Themes \ Personalize.

Once again, create a new AppsUseLightTheme DWORD (32-bit) Value with a 0 value.

Now, log out of Windows 10 and back in again. Start menu > Select your photo > Choose ‘Sign out’.

That is it!

Disabling Dark Theme in Windows 10

In order to disable the Dark Theme you just have to delete the DWORD values you created in the two registry paths or set their values to 1. Then, reboot or log out and log back in to see the changes.

#2 Method

Registry Files for Enabling/Disabling Dark Theme on Windows 10 – Fast and Easy Method

Download the .reg files provided below to enable/disable the Dark Theme on Windows 10. The first one is for enabling the Dark Theme, and the second one is for disabling it. To use, just download and double-click on the one you want. Confirm the changes if any message comes up and asks you if you are sure you want to continue. Reboot or logout and then log back in to see the changes.

 Enable dark theme.reg 

 Disable dark theme.reg 

Some of the apps keep their old interfaces in the Dark Theme, so don’t expect everything to be just like you imagine it. It is great for the most part, though, and it’s worth trying out. If you are experiencing problems, don’t hesitate to ask us aquestion or let us know your opinion!

Posted by Princ€

Read more

HACK WEBSITE VIA SQL INJECTION IN ANDROID DEVICES

What is Sql Injection?

SQL injection is a code injection technique,used to attack data-driven applications, in which nefarious SQLstatements are inserted into an entry field for execution (e.g. to dump the database contents to the attacker).SQL injection must exploit a security vulnerability in an application's software, for example, when user input is either incorrectly filtered for string literalescape characters embedded in SQL statements or user input is not strongly typed and unexpectedly executed. SQL injection is mostly known as an attack vector for websites but can be used to attack any type of SQL database.

Steps:-

1.At first you need to download All google dorks from below link.

2. Now chose a Drok and put it into Google search engine. check screenshot( i used'product.php?id=')

3.Now chose a site and copy link url.

4.Download & install our sql attack app from below link.

5.Paste the site url ' Target url' which we are get by google serch .

6.Finally....! click on inject and wait for 5-10 mintutes.

note-processing depend on your interconection, website security, & your mobile speed.

After the process is complete you will get the data of the site.

Now you can view ADMIN EMAIL , PASSWORD, USERS NAME & ALL DETAILS.

YOU CAN ALLSO USE THIS METHOD FOR CC HACKING TOO.

NOTE:-THIS TUTORIAL IS FOR EDUCATIONAL PURPOSE.PLEASE DO NOT TRY TO HARM ANYONE.

To download- all google dork list 
To download- Droid sqli 

Posted via Princ€

Read more

CONTROL YOUR FRIEND'S PC WITHOUT INSTALLING ANY SOFTWARE IN WINDOWS 10

You can control other window PC from your PC without installing any software in your PC. Remote desktop is disabled by default in Windows.

You can turn on Remote Desktop settings from Computer settings in Window 10. Remote Desktop Connection is inbuilt software in Window PC. You can control all type of windows PC from this method.

Steps:-

1. Open System Settings in your Window 10 PC.

2. Click on Remote Settings and Allow Remote Assistance Connections to the Computer. Then select Allow remote connections to this computer and click on OK.

Make sure you know the two things before moving the next steps.

IP Address
PC Username

Check your IP Address from ipconfig  in Command Prompt.

Check your PC username from Window Homescreen

How to Control Other Window 10 PC from your Computer?

1.Search rdp in Window search box.

2.Type target computer IP address in Computer box and Computer Username in the second box.

3.Type target Computer Password in the password box and click on OK.

4.Click on yes and you can successfully control your friend Window Computer from your computer.

NOTE:-THIS TUTORIAL IS FOR EDUCATIONAL PURPOSE.PLEASE DO NOT TRY TO HARM ANYONE.

Posted via Princ€

Read more